A) Specifications -Ram Tables Pressing Capacity 80-400 Tons (Adjustable) -Cushion Table Pressing Capacity 30-150 Tons (Adjustable) -Ram Table Useful Area 1200x1000 mm -Bottom Table Useful Area 1200x1000 mm -Distance Between Ram and Bottom Tables (Max) 1000 mm -Distance Between Ram and Bottom Tables (Min) 200 mm -Body Type H-FRAME Monoblock -Slider Lubrication System Automatic -Ram & Bottom Table Mold Connection T-Slots DIN 650 -T- Slots will be opened according to the approval of the customer. -The hydraulic unit will be on top of the press machine. -Ram Table is guided by sliders. B) CYLINDERS -Pressure Cylinders Stroke 0-800 mm (Adjustable) -Inside Diameter of Pressure Cylinder Ø 440 mm (1 Unit) -Axle Diameter of Pressure Cylinder Ø 330 mm (1 Unit) -Inside Diameter of Auxiliary Cylinder Ø 90 mm (2 Units) -Axle Diameter of Auxiliary Cylinder Ø 50 mm (2 Units) -Cushion Cylinder Stroke 0-300 mm -Cushion Cylinder Inside Diameter Ø 275 mm (1 Unit) -Cushion Cylinder Axle Diameter Ø 150 mm (1 Unit) C) HYDRAULIC UNIT -Ram Approaching Speed 130 mm/sec -Ram Pressing Speed 10 mm/sec (Adjustable) -Ram Return Speed 200 mm/sec -Pump (REXROTH Brand) 105 l/min (1 Unit) (Variable Displacement, Regulation, DFLR 71cc) -Pump Regulation Pressure 120 Bar -Electrical Motor 22 kW (1 Unit) -Working Pressure 235 Bar (403 Tons) -Hydraulic Block and Valves are REXROTH Brand. -Air filter brand is REXROTH. -Oil filter brand is REXROTH. -Magnetic oil tank cleaner will be used. -There will be rubber vibration absorbers under electrical motor feet -Electronic oil level switch will be used. -Maintenance covers will be available. -Air cooling (radiator) will be used for cooling. hydraulic oil. -There will be rubber vibration absorbers under the electrical motor feet. D) AUTOMATION -PLC System. PLC is SIEMENS (S7-1200 SERIES) Brand. -LCD Touchscreen is SIEMENS 7 Inch (KTP-700 BASIC) Brand. -Electrical Equipment is SIEMENS, ALLEN BRADLEY, PHOENIX Brand. -Slider lubrication time and period are Adjusted by LCD Touchscreen. -Ram Cylinders Pressing Force is Adjusted by LCD Touchscreen. -Ram Cylinders Stroke is Adjusted by LCD Touchscreen. -Ram Pressing Speed is Adjusted by LCD Touchscreen. -Oil Temperature is Shown on LCD Touchscreen. -If oil temp. reaches 48 centigrade degrees, and the air cooler starts to cool down the oil. In the situation of reaching 68 centigrade degrees, the machine stops working until it’s cooled down. -Hydraulic Oil Overheat Warning is shown by LCD Touchscreen. -Filter Dirtiness Status is Shown by LCD Touchscreen. -Mold Recipe is created and saved on LCD Touchscreen (Memory Capacity: 99) -System Errors are Shown by LCD Touchscreen. -Press Condition Info is Shown by LCD Touchscreen. -The machine is connectable to the internet to provide remote technical service by Hursan Pres ürsan automation department. (Secomea Brand Device) -Power is 380V, 3 Phase, 50 Hz AC -PLC, Output, and Buttons 24V DC E) SAFETY -The light Barrier is SICK or LEUZE Brand (1050 mm, Hand Protection) (Front & Back) -There will be security switches at the top & bottom points to limit RAM movement. -The machine is operated by a two-hand control device. -There will be a pneumatic driven mechanical safety lock system for the RAM table. -There will be Hydraulic Protection against extreme loading. -There will be Electronic Protection against extreme loading. -Press will be manufactured under CE norms (Automation panel, Hydraulic control, and safety norms). Automation under CE Norms – Safety PLC - Hydraulic Design under CE Norms – Feedback valves.
|Bed W||1,200 mm|
|Bed L||1,000 mm|